QT® ACTIVE EMITTER, FUSION EDITION (DS1320)
SOUND MASKING LOUDSPEAKER
The Qt® Active Emitter, Fusion Edition (DS1320) is a point-source Emitter (loudspeaker) capable of both sound masking and simultaneous reproduction of clear audio sources such as paging signals. The Qt Active Emitter provides higher SPL and a broader frequency range than previous direct field Emitter offerings using a 1.25”diameter driver. Patented direct-field technology ensures both uniform, comfortable sound masking as wellas clear, articulate paging in a loudspeaker that’s virtually invisible once deployed in finished or open structure ceilings. This version of the Qt Active Emitter should only be used with the DynasoundPro Networked System. When used with the DynasoundPro Networked system, power and audio signals are delivered to the Active Emitter through the DS8000 PoE Networked Speaker Controller and a PoE network switch.
Biamp, Cambridge, Dynasound, Qt, and QtPro are either trademarks or registered trademarks of Biamp Systems, LLC in the United States and other countries. Other product names referenced may be trademarks or registered marks of their respective owners and Biamp Systems is not affiliated with or sponsored by these companies.
FEATURES
• A ported emitter capable of delivering uniform,
comfortable sound masking and clear, quality paging
• Delivers quality masking and audio in a small speaker
that’s virtually invisible once deployed in finished or
open structure ceilings
• Provides direct field sound masking and high fidelity
audio with individually addressable emitters in the
Dynasound Networked system
• Plenum-rated, UL listed, and complies with UL 2043
ARCHITECTS & ENGINEERS SPECIFICATION
The emitter shall consist of a single 1.25” (3.17 cm), 4 ohm, full range transducer installed in a vented enclosure. The enclosure shall be made to meet UL Standard 2043 requirements for heat and smoke release in accordance with the provisions of the following codes: National Electric Code, NFPA 70; International Mechanical Code, NFPA 5000; Standard for the Installation of Air Conditioning and Ventilating Systems, and NFPA 90A. The emitter shall provide a screw terminal plug to be used only to connect to a Dynasound DS8000 networked speaker controller. A twist-andlock mounting ring shall be provided for quick and secure mounting in ceiling materials. The enclosure shall provide a secondary attachment for a security cable where required by local authorities.
Qt ACTIVE EMITTER, FUSION EDITION (DS1320) SPECIFICATIONS
Loudspeaker Type: Active with integrated amplifierr
Frequency Response
Sound Masking1: 125Hz to 10kHz
Music/Paging (-10dB)2: 115Hz to 12kHz
SPL1
Minimum Masking SPL (@ 1m): 30dBA
Maximum Masking SPL (@ 1m): 60dBA
Maximum Music/Paging SPL (@ 1m): 74dBA
Nominal Impedance: 40 kΩ
Nominal Dispersion: 170° conical / half space
Connectors: Screw Terminal Plug
(12 to 22 AWG)
Cabling: 2 conductor 18 AWG stranded wire
Maximum Power Consumption: 2 W
Driver Diameter: 1.25” (32mm)
Enclosure: Front Vented
Color: Black or White
Product Dimensions
Overall Diameter: 3.25 inches (83mm)
Depth: 3.5 inches (89mm)
Weight: 6.5 oz. (184g)
Included Accessories: Acoustic Ceiling Tile Mounting Ring
Compliance:
UL listed (USA)
Evaluated to the requirements of
UL 2043 and is suitable for use
in air handling spaces
1 Specifications based on emitter array using published layout practices in conjunction with Qt Control Processor.
2 Specifications based on laboratory measurements by NWAA Labs, not using Qt Control Processor.
REQUIRED ACCESSORIES
Loudspeaker Controller DS8000
OPTIONAL ACCESSORIES
Drywall Mount DM
Beam Bracket AE-BB-W, AE-BB-B
Universal Bracket AE-UB-W, AE-UB-B
Pendant Mount PM-W, PM-B
